Super Pro Twincontroller Mk2
About this product
With the MK2 Twin Controller you’ll be able to control the temperature in your grow without turning of extractors, as well as making sure that no odors can get out of the grow.
Quantity:
Sent from
Add to wish list
More product information
The MK2 Twin Controller is a temperature controller made with the latest technology. When turned on and all set up, it calculates the best set up and will set your extractor to the perfect speed so that there’s no temperature changes in your grow – it takes about 5 minutes to fully set up.
It’ll keep up a constant speed, and it’ll also make sure that there’s not more air coming in than there is air going out through negative pressure, making sure that no air will escape through anywhere that’s not an extractor, which will need to have a coal filter attached so that the extracted air doesn’t stink of weed.
If you have two of the same extractors you’ll need to increase the right wheel to between 75/90% so that it works properly, and if one of them is more powerful than the other you’ll need to connect the strongest one in Out and the second one in In.
For extractors that have different wattages you won’t need to regulate the negative pressure at all, so you won’t need to place it between 75/90% - available in two AMPages to adapt to your needs.
Two available models:
- 4.5A with a 2m sensor that supports 2.2A or 480w per plug.
- 7A with a 3m sensor that supports 3.5A or 770w per plug.
Grade Comments (0)