Lumatek Dimmable Electronic Ballast

Ballast strength

About this product

Category Ballasts

Lumatek ballast with power regulator, to adapt to crop’s stages. One of the most famous electronic ballasts on the market for its quality and efficiency.

Tax included


Secure transaction

Sent from

Add to wish list

Customer ratings

More product information

Customer ratings

With the Lumatek ballast you can adjust the lighting power with the same light bulb. You can grow your plants with a lower light intensity, saving in the electricity bill since the plants need much less light during the growth stage than during the flowering.

As the crop advances, you can progressively increase the power until the fattening stage, when you will use the Super Lumens, which is an option that will get the most out of your plants, supplying a maximum power of 660W. These ballasts barely emit any heat, so you can place them inside your crop space without trouble.

Its design makes it very appealing when mounted on a good frame on the wall of your grow room. With the Plug & Play cable (not included), you can connect any reflector without messing with the wiring (never cut the cable, or the warranty will be void).

It automatically detects the poles of the bulb, cutting the power if there’s no bulb connected, so you won’t risk explosions or short circuits.

It also has an internal fuse which will melt before the device burns out. Several models available, all with a dimmer, from 400W to 1000W.

The first model (400W) can be regulated from 250W to 400W (Super Lumen). The second model (600W), you can regulate it from 400W to 600W (Super Lumen). Finally, the most powerful model (1000W) will supply 600W up to 1000W (Super Lumen).

With these devices, you’ll boost the growth of your plants, thus obtaining larger and a more abundant flowering. They have a great casing for protection and cooling that also protects the ballast from radio interference. An internal layer of resin will keep the components in the best possible conditions, so that their durability is remarkably increased.

Technical specifications:

  • Bulb: MH/HPS
  • Output Power: 400W, 600W, 1000W.
  • Dimming range: 400W, 600W, 1000W. 10-110%
  • Maximum input current: 2,75 A.
  • Line Voltage: 240V
  • Frequency: 50/60Hz
  • Power factor: ≥0,99
  • Shot Voltage: ≤1,7KV
  • Total Harmonic Distortion: ≤10%
  • Room temperature: -10º hasta +65ºC
  • Housing Temperature: ≤70ºC
  • Dimensions: 310 x 15 x 85mm
  • Weight: 2.5 kg

Product details

Category Ballasts Reference Balastro Lumatek UPC 20

Leave your product review

Grade Comments (0)

Product History

Product added to wishlist
Product added to compare.

This site uses cookies to improve the user experience. More information on this link.