DeepRoot Irrigation Drip Emitter

DeepRoot Irrigation Drip Emitter is very easy to use and provide excellent results. Your plants will grow healthy and strong since they will get all the water and nutrients they need directly supplied at the radicular area.

You can use it along with automatic irrigation systems and nutrients as long as the nutrients you use are perfectly soluble in water and you add a salt cleaning product such as ATA Clean to your irrigation water so that the system is not clogged by capillarity.

It is directly attached to a watering pipe by means of a "Tee fitting". You can also add an adjustable valve to control flow rate. We recommend using ConeFast junctions since they are very easy to use and don't require any tools (you might need a cutter to cut pipes to the desired length).

This revolutionary system of capillarity irrigation enables the roots of your plants to make the most of water since this will never run off the pot, neither will it evaporate because it won't remain stuck on the surface.

Be moderate with watering and remember plants need water to dry out between each watering period to avoid flooding and prevent them from dying. Roots also breathe and need to have access to clean air as much as to water.

If plants are flooded, they cannot absorb water on the floor and show symptoms very similar to those shown when there's a drought. This is way we see very often growers who think their plants need more water and keep on watering them over and over again when the truth is their plants cannot breathe.

You can avoid this by mixing the growing substrate with materials which help soil to be aired such as expanded clay or coco fiber.

Made out of prime quality materials, algae and other organisms won't grow in the ducts of our system. DeepRoot Irrigation Drip Emitter is available in two different sizes to adapt to your watering needs.

Don't hesitate and get in touch with us if you have any doubt concerning your irrigation system. We'll be delighted to help you.